Home > Stone > Flagstone A to Z > Arizona Flagstone Buckskin >

Arizona Flagstone Buckskin Standup 1-3/4"
Arizona Flagstone Buckskin Select 1-3/4"
Arizona Flagstone Buckskin Standup 1-3/4"


 
Alternative Views:


Call or Email us for a shipping quote
Price Per Ton $510.00 Arizona quarry, low regional delivery rates
Inflation Fighter Sale $450.00
Savings: $60.00
Material Type: Quartzite Sandstone
Level Of Experience Required: Stone with less than 2" thickness, like this is best installed on a concrete or cement slab. These types installations require a lot of experience for best results.
Typical Time Required: Man Hours will vary according to volume of stone purchased, design and specifications.
Equipment Needed: Contractor grade wheelbarrow, heavy duty upright dolly, full level masonry saw and masonsry tool supply and hand tools.
Additional Materials Needed: Slab Walkway and Patio Setting - Cement, mortar and finishing supplies.

Quantity in Stock:249
Availability:: Usually Ships in 3 to 5 Days
Product Code: FGST108
Qty:

Description Material Transport Photos & Liability
 
Arizona Flagstone Buckskin Select 1-3/4" Minus
Price Per Ton, Full Pallet Price
This is very popular sandstone flagstone is described as a golden tan and to yellowish brown colored sandstone flagstone. Part of the differences can be explained away due to several different quarries process this stone so there will be slight variances with each quarry.

Pallets consists of large hand selected pieces of sandstone that are hand sorted to 1-3/4" thick and are fairly flat with some natural clefting on the surface.

Standup and Patio flagstone that is thinner than 2" is best installed on a concrete base with mortar and is typically are best install by an experienced mason.
Standup and Patio flagstone that is 2" or thicker is good with a sand, gravel, decomposed granite or cement a base is easily installed in landscapes by people with basic home improvement skills.

There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage.

Product Specifications and Uses
Arizona Flagstone Buckskin Select 1-3/4" Minus
Pieces range approximately 4 to 12 square feet in size.
Also available in:
Thin - 1" minus
Regular - 1" minus
Two Inch - 2" minus
Thicker select stone 2" plus
Dimensional cut stone tiles and slabs

Conforms to ASTM C 616- 85 Sandstone Building Stone as Listed below:
Resistance to abrasion averages 11.
Conforms to Type II Quartzitic Sandstone: With the exception that the specific gravity is about 140 lbs per cubic foot.
There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Desgins of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage. The information is based on average full pallets weights.

Share your knowledge of this product. Be the first to write a review »