Home > Stone > Flagstone A to Z > Arizona Flagstone Pink >

Arizona Flagstone Rosa Patio 1-3/4"
Arizona Flagstone Rosa Select Grade 3/4" to 1-3/4"
Arizona Flagstone Rosa Patio 1-3/4"


 
Alternative Views:


Call or Email us for a shipping quote
Price Per Ton $449.00 Arizona quarry, low regional delivery rates
Inflation Fighter Sale $379.99
Savings: $69.01
Material Type: Quartzite Sandstone
Level Of Experience Required: Stone with less than 2" thickness, like this is best installed on a concrete or cement slab. These types installations require a lot of experience for best results.
Typical Time Required: Man Hours will vary according to volume of stone purchased, design and specifications.
Equipment Needed: Contractor grade wheelbarrow, heavy duty upright dolly, full level masonry saw and masonsry tool supply and hand tools.
Additional Materials Needed: Slab Walkway and Patio Setting - Cement, mortar and finishing supplies.

Quantity in Stock:248
Availability:: Usually Ships in 3 to 5 Days
Product Code: FGST119SX075X175
Qty:

Description Material Transport Photos & Liability
 
Arizona Flagstone Rosa Patio Grade 1-3/4" Minus
Price Per Ton, Full Pallet Price
Arizona Flagstone is an evenly layered sedimentary rock that is in flat slabs of stone, which can be split at the quarry or on the job site into many useful stone applications.
A sandstone flagstone that is rose pink colored. this rosey pink colored flagstone consists of large hand selected pieces of sandstone that are hand sorted.
This stone is commonly sold in the trade under
Pink Flagstone
Rose Flagstone

Because there are several different names and color tones in the "Pink" flagstone group, since there are several different quarries and locations in Arizona processing this stone we strongly suggest getting some small samples at no charge, except for the shipping to compare and choose which one you like best. We can also bring some larger sections directly to you for a consultation to evaluate the stone on site.

Flagstone is priced by the pound, we can deliver this flagstone in any quantity you need for installing a flagstone walkway or patio.
This fine-grained sandstone can be used for flagging or paving walks, driveways, and patios. It can also be used as a wall stone or as stone veneer.
Our stone is delivered on pallets and we offer both select and patio grades. This stone is also is available in ledge material, saw cut material and sometimes as boulders.

Standup and Patio flagstone that is thinner than 2" is best installed on a concrete base with mortar and is typically are best install by an experienced mason.
Standup and Patio flagstone that is 2" or thicker is good with a sand, gravel, decomposed granite or cement a base is easily installed in landscapes by people with basic home improvement skills.

There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage.

When ordering use the Purchase Order function at checkout and enter ROCK as your payment method. This will allow you to create an order for a firm transportation quote without having to pay for it at this time. While we have posted transport rates, in many circumstances we are able to ship the order to you for less. You will be given a firm cost on the whole order within a few minutes to a few hours.
Product Specifications and Uses
Arizona Flagstone Rosa Patio Grade 1-3/4" Minus
Patio Grade pieces range approximately 1 to 4 square feet in size.
Conforms to ASTM C 616- 85 Sandstone Building Stone as Listed below:
Resistance to abrasion averages 11.
Conforms to Type II Quartzitic Sandstone: With the exception that the specific gravity is about 140 lbs per cubic foot.
There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage. The information is based on average full pallets weights.

Also available in Select and Patio cut grade of:
Thin - 1-1/4" minus
Regular - 1-3/4" minus
Two Inch - 2-1/4" minus
Thicker select stone 2-1/4" plus
Dimensional cut stone pavers and tiles
Ledgestone
Strip veneer
Slabs


Share your knowledge of this product. Be the first to write a review »