Home > Flagstone > Flagstone A to Z > Arizona Sedona Flagstone >

Arizona Flagstone Sedona Standup 2" Per Ton
Arizona Flagstone Sedona Red
Arizona Flagstone Sedona Standup 2"


 
Alternative Views:


Call or Email us for a shipping quote

Price Per Ton $449.00 Arizona quarry, low regional delivery rates
Inflation Fighter Sale $379.99
Savings: $69.01
Material Type: Quartzite Sandstone
Level Of Experience Required: Thick cut stone, 2" or more like this can be installed on a concrete or cement slab, decomposed granite or rock base or set into the soil on a pathway. This types installation does not require any experience.
Typical Time Required: Man Hours will vary according to volume of stone purchased, design and specifications.
Equipment Needed: Contractor grade wheelbarrow, or heavy duty upright dolly and basic masonry hand tools, masonry saw is helpful.
Additional Materials Needed: Pathway & Stepping Stone Setting - Decomposed granite or Class 1 Road Base, cement for pads, sand or mortar, if filling joints.

Quantity in Stock:238

Availability:: Usually Ships in 3 to 5 Days
Product Code: FGST122
Qty:

Description Material Transport Photos & Liability
 
Arizona Flagstone Sedona Select 2" Minus
Price Per Ton, Full Pallet Price
The brilliant red colors of mountains of Sedona Arizona are found in this wonderful natural flagstone.

Standup and Patio flagstone that is thinner than 2" is best installed on a concrete base with mortar and is typically are best install by an experienced mason.
Standup and Patio flagstone that is 2" or thicker is good with a sand, gravel, decomposed granite or cement a base is easily installed in landscapes by people with basic home improvement skills.

There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage.

Product Specifications and Uses
Arizona Flagstone Sedona Select 2" Minus

There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage. The information is based on average full pallets weights.
It conforms to ASTM C515-85 Sandstone Building Stone, tech specs are Resistance to abrasions averages 11 Conforms to Type II Quartzitic Sandstone except Specific gravity is 140 lbs. Sandstone typically weighs approximately 12 lbs per inch of thickness, per square foot. Sandstone typically can absorb 3% of its weight in moisture if not sealed.

Share your knowledge of this product. Be the first to write a review »