Home > Flagstone > Flagstone A to Z > Arizona Flagstone Buckskin >

Arizona Flagstone Buckskin Swirl Standup 1-3/4"
Arizona Buckskin Swirl Flagstone Select 1" to 1-3/4"
Arizona Flagstone Buckskin Swirl Standup 1-3/4"


 
Alternative Views:


Call or Email us for a shipping quote
$34.99 will be added for each palletized or bagged material
Price Per Ton $449.00 Arizona quarry, low regional delivery rates
Inflation Fighter Sale $379.99
Savings: $69.01
Material Type: Quartzite Sandstone
Level Of Experience Required: Stone with less than 2" thickness, like this is best installed on a concrete or cement slab. These types installations require a lot of experience for best results.
Typical Time Required: Man Hours will vary according to volume of stone purchased, design and specifications.
Equipment Needed: Contractor grade wheelbarrow, heavy duty upright dolly, full level masonry saw and masonsry tool supply and hand tools.
Additional Materials Needed: Slab Walkway and Patio Setting - Cement, mortar and finishing supplies.

Quantity in Stock:250

Availability:: Usually Ships in 3 to 5 Days
Product Code: FGST218
Qty:

Description Material Transport Photos & Liability
 
Arizona Buckskin Swirl Flagstone Select 1-3/4" Minus
Price Per Ton, Full Pallet Price
Buckskin Swirl or Buckskin Stripe is a beautiful golden yellow sandstone flagstone with charcoal grey to coal black lines in it, that look like God air brushed the patterns himself. one stone at time. Each stone is work of natural art in of itself and this stone works as fantastic wall veneer, table slabs and flooring where lighting will highlight the delicate patterns.

Standup and Patio flagstone that is thinner than 2" is best installed on a concrete base with mortar and is typically are best install by an experienced mason.
Standup and Patio flagstone that is 2" or thicker is good with a sand, gravel, decomposed granite or cement a base is easily installed in landscapes by people with basic home improvement skills.

There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage.

When ordering use the Purchase Order function at checkout and enter ROCK as your payment method. This will allow you to create an order for a firm transportation quote without having to pay for it at this time. While we have posted transport rates, in many circumstances we are able to ship the order to you for less. You will be given a firm cost on the whole order within a few minutes to a few hours.
Product Specifications and Uses
Arizona Buckskin Swirl Flagstone Select 1" to 1-3/4"
Pallets weigh approximately 3,800 pounds
Coverage is between 100 and 150 square feet per ton
Pieces are 1 to 4 square fee each

Conforms to ASTM C515-85 Sandstone Building Stone, tech specs are Resistance to abrasions averages 11
Conforms to Type II Quartzitic Sandstone except Specific gravity is 140 lbs.
Sandstone typically weighs approximately 12 lbs per inch of thickness, per square foot.
Sandstone typically can absorb 3% of its weight in moisture if not sealed.
There is always going to be slight variance of square footage from pallet to pallet even if the weights are similar. The square foot coverage per ton of flagstone will vary with each project. Designs of the project, the average stone thickness, size of joints, pattern cuts, waste etc. will effect area coverage. The information is based on average full pallets weights.

Share your knowledge of this product. Be the first to write a review »